Urecath® Stents
Ureteral stenting
The Urecath® Stents are sets for ureteral stenting after ESWL and ureteral surgery.
Features
- Certon® Polyrethane double pigtail (J) catheter
- Lateral eyes on the inner loop and the shaft
- Graduation marks every 5cm on the straight catheter part
- Radiopaque, full contrast (Barium sulphate)
- Guide-wire
- 0.035” (0.9 mm) x 90 cm for Ch. 6-9
- 0.035” (0.9 mm) x 150 cm for Ch. 6-7,5 Open/Open
- 0.024” (0.6 mm) x 90 cm for Ch. 5
- Simple pusher
- Fixation clamp
- Seal cap for the cystoscope
- Patient card
- Sterile double packaging
Different sets are available:
- Open/Closed Urecath® stent, with Tiemann tip for retrograde ureteric stenting
- Open/closed Urecath stent with Tiemann tip, 5 Ch with thread for retrograde ureteric stenting
- Open/open Urecath® stent for retrograde ureteric stenting over the guide (Seldinger technique)
Indication
- Stenting of ureter in case of hydronephrosis caused by obstruction, stenosis or occlusion of the ureter
- After ureter surgery
- Protection before ESWL
- Before radiation treatment